DeWALT DCN930 Review: Is This the Best Cordless Nailer Yet?

DeWALT has finally released the successor to the legendary DCN692 framing nailer: the DeWALT DCN930. This new model brings several long-awaited updates, but it also introduces some changes that professionals need to know about.

Buy this DeWALT DCN930 framing nailer with great price HERE 

Key Upgrades: DCN930 vs. DCN692

1. The All-Metal Magazine

The most significant physical change is the full-metal magazine.

• Fast Loading: You no longer need to lock the pusher back before inserting nails. Simply drop the strip in and pull the lever — a much faster workflow on a busy job site.

• Capacity: The magazine now supports an optional extension (sold separately), allowing you to hold two full strips of nails at once.

2. 6-Second Flywheel Delay

One of the best "quality of life" upgrades is the flywheel timing. The DCN930 keeps the flywheel active for 6 seconds after your last shot. This means when you are doing sequential firing, the tool is instantly ready for the next nail without waiting for the motor to ramp up again.

3. Power and Performance

• Driving Depth: In head-to-head testing against the DCN692, the DCN930 showed a 15-20% increase in driving power, sinking nails deeper into engineered lumber and dense beams.

• Simplified Controls: DeWALT removed the Speed 1/Speed 2 toggle switch. The tool now automatically manages power, and you only need to adjust the depth-of-drive wheel at the nose.

4. Build and Ergonomics

• Improved Nose Piece: The nose has been redesigned for a better "bite," making toe-nailing (firing at an angle) much easier and preventing slips.

• The Weight Trade-off: The new model is roughly 230g (0.5 lbs) heavier than the old one. To balance this out, we recommend using a compact PowerStack battery.

• Metal Rafter Hook: The plastic hook from the older generation has been replaced with a durable metal version.

Maintenance: A Shift in Strategy?

There is one major change that might worry DIY-repair enthusiasts. While the DCN692 manual included detailed instructions for replacing the driver blade and springs at home, the DCN930 manual omits this.

During teardown, the internal screws were found to be secured with heavy-duty thread locker, making it much harder to open than the previous model. It appears DeWALT is steering users toward professional service centers rather than field repairs.

Final Verdict

The DeWALT DCN930 is undeniably faster, more powerful, and feels more robust thanks to the metal magazine. If you are looking for production speed, the 6-second flywheel delay is a game-changer. However, be prepared for a slightly heavier tool and a more "closed" system when it comes to repairs.